|
This is the volume enhancer that will let you hear your music and GPS directions more clearly. Use it on your motorcycle, or in your car. With four times the volume, and our patent pending sound separating circuit, you'll hear all the detail in your music, while being able to adjust the volume down on your player to eliminate distortion.
This Revolution model has been upgraded with a 12V power supply for use in car and motorcycle audio. No more batteries are required for this tiny audio amplifier.
To make sure you get the cleanest audio possible, we've also added additional filters to prevent any noise that may generate from your car or motorcycle.
What the Amplifier Does?
The Revolution is an audio amplifier for helmet speakers, car auxiliary inputs, and small mounted speakers for motorcycles.
The Revolution will work with a variety of audio devices such as:
- iPods and other MP3 players
- Satellite radios
- GPS systems
- Smartphones
- Car and motorcycles with AUX input
The amplifier also has a built-in 2 channel audio splitter. So two users can listen at the same time.
The Boostaroo Revolution will amplify the audio signal coming from your audio player up to four times. This extra power provides the boost needed to adequately drive your helmet speakers, headphones, or bike speakers. The added power increase also allows you to lower the volume on your player, resulting in decreased distortion and drain on the player's battery.
The Revolution has a Patent Pending audio cross feed circuit that increases the dynamic range of audio providing the user with clear audio and a more natural listening experience. Many users compare it to a sense of being in a recording studio.
Made in the USA. Back by a 90-Day Money Back Guarantee and a 1 Year Warranty.
Package Includes:
1-12V Boostaroo Revolution
1-12V Cigarette Lighter Adapter with 5 ft. Power Cord
1-12" Stereo 3.5mm Audio Patch Cable
1-Owner’s Manual
Connecting the Boostaroo Revolution
The Boostaroo Revolution is very easy to connect. Plug the 12V CLA power source into the power source on your motorcycle or car, and the power jack of the Revolution. Then plug one end of the included 3.5mm (1/8") audio cable into the output of your audio player, and then connect the other end of the audio cable into the input of the amplifier. All that’s left is to plug your helmet, headphones, or speakers into one of the Revolution's two outputs and you’re good to go. Here is an illustration to help guide you.
Hard Wiring or Powerlet Users
The noise reduction and power transforming cicuitry is located directly inside of the Revolution. To hard wire to your bike, or use a Powerlet adapter. Simply, remove the cigarette lighter head of the power cable and connect to your bike, or Powerlet adapter.
Use the Revolution in Your Car
Take the 12V powered Revolution in your car. Plug it into your cigarette lighter for power. Then plug the Revolution into your Mp3 player and the auxiliary (AUX) input on your stereo, or even an FM transmitter.
Tech Specs for Model: R234-MC
Input:
Input: One 3.5mm (1/8") Stereo Jack
Impedance: 5K Ohms @ 1Khz
Output:
Outputs: Two 3.5mm (1/8") Stereo Jacks
Impedance: 5.5 Ohms
40 mW per channel
22 dB boost
THD: less than 0.5%
Frequency Response:
20 to 20,000Hz +/- 2 dB (EIAJ CP-307 Method).
Signal to noise ratio -110dBA from clipping
Power Requirements:
12 Volts DC @100 mA Input 3.3 Volts @70mA into Revolution
Product Dimensions:
Size 4.4” x .875” x.832”
Unit weight 4 oz, 10 oz with included accessories
Color: High Gloss Black Finish
|